Burn………Baby……….Burn

WARNING: The following presentation discusses a form of wood finishing which involves the use of an open flame, a torch to be more specific. Please be familiar with your particular device and read all cautions and warnings for said device. The Sting Of The Scorpion Blog nor myself will not be held responsible for any errors in your judgement. The information provided in this post is educational under the assumption that the person attempting this particular technique has a certain degree of common sense. Therefore, if YOU fuck it up YOU yourself is responsible for fucking it up, not me or this blog. One needs to be aware of the dangers involved when using an open flame. In the end, practice first, practice again, and be extremely fucking careful. Again, I will not be held responsible for YOUR errors or victories. The following information is based on my personal experience and knowledge. Got it?

img_20160218_115032817_hdr.jpg

When I lived in Japan I was very lucky to have stumbled upon an older gentleman who was willing to teach me a wood finishing technique called Yaki-Matsu (burnt pine). Since then I have practiced and somewhat perfected my own personal version of this wood finishing technique. I cannot stress enough, seriously, that this can turn into a disaster in a blink of an eye since wood burns, but with a little practice one can tame the flame to make a very unique look on anything made of wood. Also, let me just state that I have 30 plus years experience in woodworking and cabinetry. Therefore, I hate to call this a DIY style post. My intent is to share a technique of wood finishing that others can try on small to large projects. Before you try any of this at home be sure you are aware of what you are doing and be responsible enough to know your personal limits and skills.

img_20160218_115010541_hdr.jpg

In reality this post won’t be an all inclusive do it yourself post on how to burn the grain of the wood to get this special look. Basically, I’m just answering all the questions in advance since it might be hard to grasp the concept and design of my project personally. As one can see from the pictures, my project was to create an island space in a rustic nature to blend in with the cedar woodwork in my sister’s 100+ year old farm house. Also, before all of y’all self appointed experts try to get in my ass for not doing it your way just feel free to hold those opinions. Like any “tradition”, I have taken this technique and made it my own. Trust me, I’ve ruined more than one piece of wood over the years. As mentioned, my sister wanted something unique, not the typical look, not something out of the box, and something that had a ” wow factor”. Overall, it was a very tall order to fill, and not to mention that this has been a time consuming project to say the absolute very least. So let’s begin the highlight reel.

img_20160218_105358827_hdr.jpg

Where y’all see an island used to be a wall with a pass through hole in it. First step, demo the wall and support the second floor. Then to create bar height seating as well as an island that is kitchen counter height. The secondary purpose of the island was for storage. Once the construction portion was complete it was time to talk finishing it all off. I chose to “antique” and distress everything except for the two cedar posts and the actual counter and bar surfaces. Antiquing this much area, to include the ceiling features took a great deal of time. I remind everyone that everything you see was created, from the tongue and groove beaded boards to all the trim, the cabinet doors, and so forth. I left my treatment of the top a secret, a surprise that was either going to make or break this project. By now I can assume that many of y’all have Googled the term “Yaki-Matsu” so I can simply tell y’all it is a technique in which the grain of the wood is kissed with the open flame of a torch. I chose this instead of staining or leaving it natural because of its true uniqueness, as no two boards look the same. When the time came to mount the wood I used square headed barn nails that I liberated from a 147 year old barn we tore down last summer. Yes, I have hundreds and hundreds of feet of barn lumber and no it is not for sale. At the time of these pictures I had not applied the varathane yet. After burning the one all that needs to be done is rubbing the wood down with a dry, clean, soft cloth.

img_20160218_105442713_hdr.jpg

I will post more pictures when I’m 100% done. Hell, the purpose of this post was to let some concerned individuals know what I’ve been up to because they think I have quit blogging or that I’m dead. So far I have around 200 hours invested into it, I probably have at least 20 to go. Just know this, as a final warning, one will come across occasions when using the torch in the house becomes necessary to touch up edges and so forth, remember that most things in our houses don’t react well with open flames, I’m just saying. I guess as I look back over what has been written I can see this wasn’t much of a tutorial at all, which is fitting because I such giving instructions for the most part. If nothing else maybe y’all learned that there is yet another way to beautifully treat wood without stain or paint. I suppose, in the end, I’ll just share some pictures with y’all and call it good.

Please take time to let The Sting Of The Scorpion know what you are thinking.

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s